If you’re having trouble getting a shower to work properly, you may wonder how to fix a leaky shower head. Several methods include switching out a shower head, cleaning the shower arm, and replacing the cartridge insert in the faucet valve. In this article, you’ll learn how to fix a leaky shower head using a few basic tools.
Repairing a leaky shower head
If you are frustrated with the water leakage from your shower head, there are several easy ways to fix the problem yourself. A common cause is mineral deposits that have accumulated on the fittings. This happens when the fittings are either too old or poorly installed. Another easy way to repair a leaky shower head is to replace the compression faucet washer. Finally, if you don’t have the proper tools, you can call a plumber for help.
First, unplug the shower head and cover the drain. This will prevent parts from falling into the drain. Next, unscrew the shower head from the pipe. Some shower heads can be hard to unscrew, so you may need a wrench or pliers to get them off. Once the head is removed, clean and apply Teflon tape to the connection on the hose. Make sure that there are no loose parts or leaks inside the shower head.
Switching out a shower head
If your shower leaks, you may be able to fix it yourself. To do this, you need to shut the water off to the shower area and unscrew the head. The shower head may be a tight fit, so you may need to use a wrench or pliers to remove it. Before removing the head, ensure the material around it isn’t worn or torn.
The shower head is often the source of the leak, but other plumbing fixtures in the shower can also be to blame. For example, a faucet that runs into the wall can divert water to the shower head. And a faucet that flows into the tub may have a diverter valve, which means that a leak in the shower head could also be coming from the diverter valve.
Cleaning the shower arm
One of the most effective ways to fix a leaky shower head is by cleaning the shower arm. This will help eliminate limescale and another scale that has built up on the shower head. If the head is clogged, soak it in a solution of baking soda and vinegar. Then scrub the clogged area with a toothbrush. You can also use toothpicks to clean inside the shower head’s holes. Once the shower arm is clean, wrap it in thread seal tape to prevent water from leaking.
Before replacing the shower head, clean the threads. It’s also a good idea to wrap the threads with Teflon tape. This will prevent leaks and improve water pressure.
Replacing the cartridge insert in the faucet valve
Replacing the cartridge insert in a faucet valve is easy to fix a leaky shower head. To do so, you should first turn off the shower’s water supply and remove the shower handle and faucet body stem cap. Then, use a small screwdriver to remove the retaining clip. Then, you can remove the old cartridge and replace it with the new one.
You can also replace the valve body and stem by replacing the cartridge. If you don’t have any experience with replacing these parts, you can use an image search function in The Home Depot to find a replacement cartridge. Depending on the brand of the faucet, you may need to purchase a tool to remove the cartridge. The cartridge should also be replaced with a new valve stem and seat. To avoid further damage, you can also clean the inside of the valve body with an old toothbrush.
Protecting the shower head from damage
When fixing a leaky shower head, there are a few things you can do to protect the shower head from further damage. One common cause of leaking showerheads is a worn-out or corroded seal. To prevent further damage, protect the shower head by cleaning it thoroughly.
Before attempting to repair a leaky shower head, ensure you have the correct tools and materials to complete the repair. It would help if you never tried to force or overtighten the equipment. A hex key can help you loosen the shower faucet handles. You may also need a cartridge puller for some shower faucets. If you are unsure about what tools you need, consult the instructions.
Make sure that you cover the drain when removing the shower head. This will keep the parts of the shower head from falling into the drain, which can cause further damage. Then, unscrew the shower head from the pipe. If it is too difficult to unscrew the shower head, you may need pliers or a wrench to help you. Regardless of your showerhead type, it is important to protect it from damage.